Frequency | 433MHz |
Compatibility Status |
Hub Hardware - HUB-1, HUBLTE-1 Hub Firmware - 0.0.2.26 and above |
Battery Type & Estimated Life |
1x CR123 Lithium battery (10 years) |
Shown in App | No |
Note |
A keypad can only be assigned to 1 area. If you have more than 1 area consider using the TouchOne or mobile app. |
Power LED (Green):
Fault LED (Orange):
Arm mode: Enter any valid user code, then press the red locked lock icon to arm the system.
Stay Arm mode: Enter any valid user code, then press the red home with small locked lock icon to stay arm the system.
Disarm: Enter any valid user code, then press the green unlocked lock icon to disarm the system.
Panic Alarm: Press keys 1 + 3 together to activate a panic alarm (this can be changed in the WMI).
Fire Alarm: Press keys 4 + 6 together to activate a fire alarm (this can be changed in the WMI).
Medical Alarm: Press keys 7 + 9 together to activate a medical alarm (this can be changed in the WMI).
Manual - KP-39-P3-F1 Manual
Data Sheet - KP-39-P3-F1 Datasheet