The overview section covers the master user's details.
From the overview section we can see some basic information about the panel. Here is where you will add the physical address that the panel is located, as well as contact details of the panel owner.
(1) To edit this information, tap the Edit button.
Once you choose to edit the area settings, you will be taken to this screen. You can see that settings like Entry Delay 1 Time, appears twice. This is because you can set an Entry Delay 1 time for Sleep Armed Mode, and for Armed Mode.
Sleep Armed Mode:
Entry Delay 1 Time - set the sleep armed mode entry delay 1 time for the area you are editing.
Entry Delay 2 Time - set the sleep armed mode entry delay 2 time for the area you are editing.
Exit Delay Time - set the sleep armed mode exit delay time for the area you are editing.
Entry Delay Beep Vol. - set the sleep armed mode entry delay beep volume for the area you are editing.
Exit Delay Beep Vol. - set the sleep armed mode exit delay beep volume for the area you are editing.
Armed Mode:
Entry Delay 1 Time - set the armed mode entry delay 1 time for the area you are editing.
Entry Delay 2 Time - set the armed mode entry delay 2 time for the area you are editing.
Exit Delay Time - set the armed mode exit delay time for the area you are editing.
Entry Delay Beep Vol. - set the armed mode entry delay beep volume for the area you are editing.
Exit Delay Beep Vol. - set the armed mode exit delay beep volume for the area you are editing.
Alarm:
Alarm Length - set the length of time the panel will sound an alarm for.
Other Settings:
Chime Beep Vol. - set the panel wide chime beep volume.
Force Arm - set this to enable if you want the user to be able to force arm the area you are editing.
Rename Area - edit this section to give a meaningful name to the area you are editing. This name will display for users of the iOS and Android apps, and in event notifications.
Once you choose to add a user, you will be taken to this screen:
Mobile Number - the mobile number of the user you are adding.
User Type - the type of user you are adding to the system, either a master or standard user.
User Nickname - the name of the user that will display in the WMI and mobile app.
Area - the area you assigning the user to. If you wish to assign the user to both areas, add the user to one area first, then the second area.
Invite To Create A User - Select this option if the user will be using the mobile app. Tapping this button will send the user an SMS containing a link to download the mobile app.
I'll Setup The Disarm Pin Myself - only select this option if the user will not be using the mobile app.
GSM - This setting is only available on Hub LTE-1 devices which allow you to use a SIM card to connect the control panel to a mobile network. This can be used in conjunction with an internet connection via ethernet, or as a standalone network connection. Refer: Configuring GMS settings
Zigbee Channel - This is used when pairing and operating zigbee devices. By default, panels are configured to use Zigbee Channel 11. If pairing Bosch sensors, we recommend using this channel.
System Supervisor - When enabled the system supervisor will send push notifications to Standard and Master users if the panel goes offline, and when it comes back online. By default this value is set to On.